Publications
“Rebuild the Materials”
International Journal
2022
-
01
K.K. Ko, H.J. Bae, E.H. Park, M. Ishtiaq, H.S. Park, J.S. Jeong, J.G. Kim, H. Sung, J.B. Seol
“A feasible route to produce 1.1 GPa ferritic-based low-Mn lightweight steels with ductility of 47%” Journal of Materials Science & Technology 117 (2022) 225-237.
-
02
H.J. Bae, K.K. Ko, M. Ishtiaq, J.G. Kim, H Sung, J.B. Seol
“On the stacking fault forming probability and stacking fault energy in carbon-doped 17 at% Mn steels via transmission electron microscopy and atom probe tomography” Journal of Materials Science & Technology. 115, (2022) 177–188 .
-
03
S.H. Kayani, S.E. Park, J.G. Kim, J.B. Seol, H.K. Sung
“Direct observation of chemical short-range order in 25 wt% Mn steel via transmission electron microscopy” Scripta Materialia 213 (2022) 114642.
-
04
M. Gwak, S. Kim, D.J. Lee, J.B. Seol, H. Sung, T.-H. Nam, S. Kim, J.G. Kim
“Post-annealing effect on the tensile deformation mechanism of a Ti-6Al-4V alloy manufactured via directed energy deposition” MATERIALS SCIENCE AND ENGINEERING A 836 (2022) 142729.
-
05
J. Oh, S. Park, H.J. Bae, S. Son, H.S. Kim, J.B. Seol, H. Sung, J.G. Kim
“Mechanical properties and microstructural evolution of high-pressure torsion-processed Al7075 alloy at elevated temperatures” MATERIALS SCIENCE AND ENGINEERING A 835 (2022) 142692.
-
06
J. Jeong, M. Roscher, W. An, S. Son, J.B. Seol, H. Sung, H.S. Kim, E. Jägle, J.G. Kim
“Evolution of nanosized Cu-rich clusters in a Fe-15Cu-15Ni alloy produced by laser powder bed fusion” MATERIALS SCIENCE AND ENGINEERING A 832 (2022)142462.
-
07
Y. Lee, E.S. Kim, S. Park, J.M. Park, J.B. Seol, H.S. Kim, T. Lee, H. Sung, J.G. Kim
“The effects of laser power on the microstructure evolution and mechanical properties of Ti-6Al-4V alloy manufactured by direct energy deposition” METALS AND MATERIALS INTERNATIONAL 28 (2022) 197-204.
2021
-
01
E.T. Kim, K.K. Ko, M. Ishtiaq, H.J. Bae, H. Sung, J.G. Kim, J.B. Seol
“Near atomic-scale comparison of passive film on a 17 wt% Cr-added 18 wt% Mn steel with those on typical austenitic stainless steels” SCRIPTA MATERIALIA 203 (2021) 114112.
-
02
HJ Im, WS Choi, KH Ryou, JB Seol, TH Kang, WS Ko, PP Choi
“Enhanced microstructural stability of γ/γ′-strengthened Co-Ti-Mo-based alloys through Al additions”, ACTA MATERIALIA (2021) 117011.
-
03
J. Oh, H.D. Park, M. Gwak, J. Lee, S. Son, A. Amanov, H.S. Kim, J.B. Seol, H. Sung, J.G. Kim
“Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification” MATERIALS SCIENCE AND ENGINEERING A 812 (2021) 141101.
-
04
J. Lee, J.B. Seol, J.H. Jang, H.U. Hong
“Uncommon Cr-rich γ′ precipitation during creep at 950° C in Inconel 617 superalloy with serrated grain boundaries through pre-straining” MATERIALS SCIENCE AND ENGINEERING A 803 (2021) 170715.
-
05
H. Kim, H. Ha, J. Lee, S. Son, H.S. Kim, H. Sung, J.B. Seol, J.G. Kim
“Outstanding mechanical properties of ultrafine-grained Al7075 alloys by high-pressure torsion” MATERIALS SCIENCE AND ENGINEERING A 810 (2021) 141020.
-
06
J. Lee, H. Ha, J.B. Seol, J.G. Kim, E.H. Seo, S.K. Moon, H. Sung
“Reverse effect of hot isostatic pressing on high-speed selective laser melted Ti–6Al–4V alloy” MATERIALS SCIENCE AND ENGINEERING A 807 (2021) 140880.
-
07
S. Li, I.U. Rehman, J.H. Lim, W.T. Lee, J.B. Seol, J.G. Kim, T.H. Nam
“Effect of Sn content on microstructure, texture evolution, transformation behavior and superelastic properties of Ti–20Zr–9Nb‒(2–5)Sn (at.%) shape memory alloys” Materials Science and Engineering A 827 (2021) 141994
-
08
H.J. Bae, K.K. Ko, H.S. Park, J.S. Jeong, J.G. Kim, H.K. Sung, J.B. Seol
“Development of 1.2 GPa Ferrite-based Lightweight Steels via Low-temperature Tempering” KOREAN JOURNAL OF METALS AND MATERIALS 59 (2021) 695-703.
-
09
J.H. Jeong, Y.K. Lee, J.M. Park, D.J. Lee, I.G. Jeon, H. Sohn, H.S. Kim, T.H. Nam, H.K. Sung, J.B. Seol, J.G. Kim
“Metastable δ-ferrite and twinning-induced plasticity on the strain hardening behavior of directed energy deposition-processed 304L austenitic stainless steel” Additive Manufacturing 47 (2021) 102363.
-
10
S.E Park, S.H. Kayani, H.R. Kim, I.D. Jung, N.S. Reddy, K.J. Euh, J.B. Seol, J.G. Kim, H.K. Sung
“Effect of Interdendritic Precipitations on the Mechanical Properties of GBF or EMS Processed Al-Zn-Mg-Cu Alloys” Crystals 11 (2021) 1162.
-
11
D.H. Bae, J.S. Lee, J.H. Jeong, J.B. Seol, H.K. Sung, J.G. Kim
“Hydrogen-induced ordering on the deformation mechanism of the as-cast high-Mn steel” Materials Science and Engineering A 825 (2021) 141923.
-
12
S. Veerapandian, W. Jang, J.B. Seol, H.B. Wang, M.S. Kong, K. Thiyagarajan, J.H. Kwak, G.B. Park, G.W. Lee, W.J. Suh, I.S. You, M.E. Kılıç, A. Giri, L. Beccai, A. Soon, U.Y. Jeong
“Hydrogen-doped viscoplastic liquid metal microparticles for stretchable printed metal lines” NATURE MATERIALS 20 (2021) 533-540.
-
13
J.G. Kim, J.B. Seol, J.M. Park, H.K. Sung, S.H. Park, H.S. Kim
“Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels” METALS AND MATERIALS INTERNATIONAL 27 (2021) 2614-2622.
-
14
K.K. Ko, H.J. Bae, S.W. Jung, H.K. Sung, J.G. Kim, J.B. Seol
“Measurement Method of Prior Austenite Grain Size of Nb-added Fe-based Alloys” Journal of Korean Powder Metallurgy Institute 28 (2021) 317-324.
2020
-
01
JG. Kim, JB Seol , JW Bae, HS Kim
“On the mechanistic understanding of annealing-induced strength enhancement of ultrafine-grained high-Mn steel” Materialia 13, 100837 (2020)
-
02
JB Seol , JW Bae, JG Kim, HK Sung , H.H. Lee , W.S.Ko , H.S. Kim
“Short-range order strengthening in boron-doped high-entropy alloys” Acta Materialia 194, 366-377 (2020)
-
03
SK Oh, ME Kilic, JB Seol, JS Hong, A Soon, YK Lee
“The mechanism of dynamic strain aging for type A serrations in tensile flow curves of Fe-18Mn-0.55 C (wt.%) twinning-induced plasticity steel” Acta Materialia 188, 366-375 (2020)
-
04
SH Kim, K Jang, PW Kang, JP Ahn, JB Seol, CM Kwak, C Hatzoglou
“Characterization of Pd and Pd@ Au core-shell nanoparticles using atom probe tomography and field evaporation simulation” Journal of Alloys and Compounds, 831 (2020) 154721
-
05
JG Kim, JM Park, JB Seol, J Choe, JH Yu, S Yang, HS Kim
“Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy” Materials Science and Engineering A 773, 138726 (2020)
2019
-
01
J Moon, SI Hong, JB Seol, JW Bae, JM Park, HS Kim
“Strain-rate sensitivity of high-entropy alloys and its significance in deformation“Materials Research Letters 7 (12), 503-509 2 (2019)
-
02
H Choi, YJ Kwon, J Paik, JB Seol, YK Jeong
“p-Type Conductivity of Hydrated Amorphous V2O5 and Its Enhanced Photocatalytic Performance in ZnO/V2O5/rGO“ACS Applied Electronic Materials 1 (9), 1881-1889 (2019)
-
03
KH Hong, JB Seol, JH Kim
“First principles determination of formation of a Cr shell on the interface between Y–Ti–O nanoparticles and a ferritic steel matrix” Applied Surface Science 481, 69-74 (2019)
-
04
BM Arkhurst, JB Seol, YS Lee, M Lee, JH Kim
“Interfacial structure and bonding mechanism of AZ31/carbon-fiber-reinforced plastic composites fabricated by thermal laser joining“Composites Part B: Engineering 167, 71-82 5 (2019)
-
05
S Lee, SH Kang, JH Nam, SM Lee, JB Seol, YK Lee
“Effect of Tempering on the Microstructure and Tensile Properties of a Martensitic Medium-Mn Lightweight Steel” Metallurgical and Materials Transactions A 50 (6), 2655-2664 (2019)
-
06
JB Seol, CM Kwak, JC Han, KH Baek, YK Jeong
“Correlative transmission electron microscopy and atom probe tomography on field evaporation mechanism of a bulk LaAlO3 oxide” Applied Surface Science 479, 828-834 (2019)
-
07
C Jung, K Kang, A Marshal, KG Pradeep, JB Seol, HM Lee, PP Choi
“Effects of phase composition and elemental partitioning on soft magnetic properties of AlFeCoCrMn high entropy alloys“ Acta Materialia 171, 31-39 4 (2019)
-
08
B Yoo, HJ Im, JB Seol, PP Choi
“On the microstructural evolution and partitioning behavior of L12-structured γ′-based Co-Ti-W alloys upon Cr and Al alloying“Intermetallics 104, 97-102 6 (2019)
2018
-
01
JB Seol
“A Brief Review of κ-Carbide in Fe-Mn-Al-C Model Alloys“ Applied Microscopy 48 (4), 117-121 (2018)
-
02
JW Bae, JB Seol, J Moon, SS Sohn, MJ Jang, HY Um, BJ Lee, HS Kim
"Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures“ Acta Materialia 161, 388-399 18 (2018)
-
03
BG Chae, JH Lee, S Park, E Lee, CM Kwak, M Jafari, YK Jeong, CG Park, JB Seol
“Direct three-dimensional observation of core/shell-structured quantum dots with a composition-competitive gradient“ ACS nano 12 (12), 12109-12117 6 (2018)
-
04
JC Han, JB Seol, M Jafari, JE Kim, SJ Seo, CG Park
“Competitive grain boundary segregation of phosphorus and carbon governs delamination crack in a ferritic steel“ Materials Characterization 145, 454-460 3 (2018)
-
05
JG Kim, NA Enikeev, JB Seol, MM Abramova, MV Karavaeva, RZ Valiev
“Superior strength and Multiple strengthening mechanisms in Nanocrystalline TWIP steel“ Scientific reports 8, 1-10 (2018)
-
06
JH Song, YT Kim, JB Seol, CG Park, JM Myoung, U Jeong
“Enhanced Chemical Stability of Ag Nanowires by Slight Surface Modification with Pd“ Advanced Materials Interfaces 5 (13), 1800250 3 (2018)
-
07
SH Kim, PW Kang, O Park, JB Seol, JP Ahn, JY Lee, PP Choi
“A new method for mapping the three-dimensional atomic distribution within nanoparticles by atom probe tomography (APT)“ Ultramicroscopy 190, 30-38 9 (2018)
-
08
JB Seol, D Haley, DT Hoelzer, JH Kim
“Influences of interstitial and extrusion temperature on grain boundary segregation, Y− Ti− O nanofeatures, and mechanical properties of ferritic steels“ Acta Materialia 153, 71-85 11 (2018)
-
09
JB Seol, D Haley, DT Hoelzer, JH Kim
“Boron doped ultrastrong and ductile high-entropy alloys“ Acta Materialia 151, 366-376 47 (2018)
-
10
JE Kim, JB Seol, WM Choi, BJ Lee, CG Park
“Isothermal Treatment Effects on Precipitates and Tensile Properties of an HSLA Steel“ Metals and Materials International 24 (3), 525-531 1 (2018)
-
11
WY Jung, CM Kwak, JB Seol, JK Park, CG Park, YK Jeong
“Observation of Anisotropic Growth and Compositional Discontinuity in AlGaN Electron-Blocking Layers on GaN Microrods“ Crystal Growth & Design 18 (3), 1593-1597 3 (2018)
-
12
JW Lee, M Terner, HU Hong, SH Na, JB Seol, JH Jang, TH Lee
“A new observation of strain-induced grain boundary serration and its underlying mechanism in a Ni–20Cr binary model alloy“ Materials Characterization 135, 146-153 (2018)
2017
-
01
M Jafari, JC Han, JB Seol, CG Park
“Tribological properties of HVOF-sprayed WC-Co coatings deposited from Ni-plated powders at elevated temperature“ Surface and Coatings Technology 327, 48-58 15 (2017)
-
02
BG Chae, JB Seol, JH Song, K Baek, SH Oh, H Hwang, CG Park
“Nanometer-Scale Phase Transformation Determines Threshold and Memory Switching Mechanism“ Advanced materials 29 (30), 1701752 24 (2017)
-
03
JC Han, M Jafari, CG Park, JB Seol
“Microstructure-property relations in WC-Co coatings sprayed from combinatorial Ni-plated and nanostructured powders” Materials Characterization 129, 207-216 (2017)
-
04
JB Seol, JG Kim, SH Na, CG Park, HS Kim
“Deformation rate controls atomic-scale dynamic strain aging and phase transformation in high Mn TRIP steels“ Acta Materialia 131, 187-196 22 (2017)
-
05
YT Kim, JB Seol, YH Kim, HJ Ahn, CG Park
“Correlation of Controllable Aggregation with Light?Emitting Property in Polymer Blend Optoelectronic Devices“ Small 13 (14), 1602874 2 (2017)
-
06
CM Kwak, YT Kim, CG Park, JB Seol
“Understanding of Capping Effects on the Tip Shape Evolution and on the Atom Probe Data of Bulk LaAlO3 Using Transmission Electron Microscopy“ Microscopy and Microanalysis 23 (2), 329-335 4 (2017)
-
07
SH Na, JB Seol, M Jafari, CG Park
“A Correlative Approach for Identifying Complex Phases by Electron Backscatter Diffraction and Transmission Electron Microscopy“ Applied Microscopy 47 (1), 43-49 1 (2017)
-
08
W Guo, PP Choi, JB Seol
“Amorphous phase separation in an Fe-based bulk metallic glass“ Materials Letters 190, 161-164 1 (2017)
-
09
CM Kwak, JB Seol, YT Kim, CG Park
“Laser-assisted atom probe tomography of four paired poly-Si/SiO2 multiple-stacks with each thickness of 10 nm“ Applied Surface Science 396, 497-503 5 (2017)
-
10
JB Seol, SH Na, B Gault, JE Kim, JC Han, CG Park, D Raabe
“Core-shell nanoparticle arrays double the strength of steel“ Scientific reports 7, 42547 26 (2017)
2016
-
01
M.J. Yao, P. Dey, J.B. Seol, P. Choi, M. Herbig, R.K.W. Marceau, T. Hickel, J. Neugebauer, D. Raabe
"Combined atom probe tomography and density functional theory investigation of the Al off-stoichiometry of k-carbides in an austenitic Fe-Mn-Al-C low density steel" Acta Materialia. 106: 229-238 (2016).
-
02
J.B. Seol, C.-M. Kwak, Y.-T. Kim, C.-G. Park
"Understanding of the field evaporation of surface modified oxide materials through transmission electron microscopy and atom probe tomography" Applied Surface Science. 368: 367-377 (2016)
-
03
B.-G. Chae, J.B. Seol, J.-H. Song, W.-Y Jung, H. Hwang, C.-G. Park
"Atomic-scale quantification of interdiffusion and dopant localization in GeSbTe-based memory devices" Applied Physics Letter. 109(11): 112103 (2016)
-
04
W.-Y. Jung, J.B. Seol, C.-M. Kwak, C.-G. Park
"Three-Dimensional Indium Distribution in Electron-Beam Irradiated Multiple Quantum Wells of Blue-Emitting InGaN/GaN Devices" Applied Physics Letter. 108: 11311 (2016)
-
05
J.B. Seol, Y.-T. Kim, B.-H. Kim, C.-G. Park
"Novel approach for observing the asymmetrical evolution and the compositional nonuniformity of laser pulsed atom probe tomography of a single ZnO nanowire" Metals and Materials International. 22(1): 34-40 (2016)
-
06
J.B. Seol, J.-M. Choi, J.H. Kim
"Influence of Solid Solution Treatment on the Mechanical Properties of A286 Stainless Steels" Science of Advanced Materials 8 2290-2294 (2016)
-
07
J.B. Seol, Y.T. Kim, C.G. Park
“A Brief Comment on Atom Probe Tomography Applications” Applied Microscopy 46 127-133 (2016)
-
08
Y.T. Kim, J.B. Seol, C.M. Kwak, C.G. Park
“Influence of Laser-Pulse Energy on Field Evaporation of LaAlO 3 in Atom Probe Tomography Analysis” Microscopy and Microanalysis 22, 1604-1605 (2016)
-
09
J.B. Seol, H.S. Park, C.G. Park
“Direct In situ Observation of Tempering-induced Austenite Decomposition and Atom Probe Analyses of k-Carbide Precipitates in Lightweight Fe-Mn-Al-C Steels” Microscopy and Microanalysis 22, 704-705 (2016)
-
10
J.B. Seol, J.H. Kim
“Grain boundary segregation and core/shell structured nanofeatures in oxide-dispersion strengthened Fe-Cr alloys” Microscopy and Microanalysis 22, 674-675 (2016)
2015
-
01
C.W. Bang, J.B. Seol, Y.S. Yang, C.G. Park
"Atomically resolved cementite dissolution governed by the strain state in pearlite steel wires” Scripta Materialia 108, 151-155 (2015)
-
02
H.S. Park, J.B. Seol, N.S. Lim, S.I. Kim, C.G. Park
"Study of the decomposition behavior of retained austenite and the partitioning of alloying elements during tempering in CMnSiAl TRIP steels” Materials & Design 82, 173-180 (2015)
-
03
H.S. Park, J.C. Han, N.S. Lim, J.B. Seol, C.G. Park
"Nano-scale observation on the transformation behavior and mechanical stability of individual retained austenite in CMnSiAl TRIP steels” Materials Science and Engineering A 627, 262-269 (2015)
-
04
J.H. Kim, T.S. Byun, E Shin, J.B. Seol, S Young, N.S. Reddy
"Small angle neutron scattering analyses and high temperature mechanical properties of nano-structured oxide dispersion-strengthened steels produced via cryomilling” Journal of Alloys and Compounds 651, 363-374 (2015)
-
05
J.H. Kim, T.S. Byun, E Shin, J.B. Seol, S Young, N.S. Reddy
"Temperature-dependent nanomorphology–performance relations in binary iridium complex blend films for organic light emitting diodes” Physical Chemistry Chemical Physics 17, 21555-21563 (2015)
2014
-
01
D. Raabe, H. Springer, I. Gutierrez-Urrutia, F. Rosters. M. Bausch, J.B. Seol, M. Koyama, P.P. Choi, K. Tsuzaki
"Alloy Design, Combinatorial Synthesis, and Microstructure–Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels” JOM 66, 1845-1856 (2014)
-
02
S.H. Bang, K.K. Kim, H.Y. Jung, T.H. Kim, S.H. Jeon, J.B. Seol
"Application of NiMoNb adhesion layer on plasma-treated polyimide substrate for flexible electronic devices” Thin Solid Films 558, 405-410 (2014)
2013
-
01
J.B. Seol, J.E. Jung, Y.W. Jang, C.G. Park
"Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/ε-martensite dual-phase Fe–Mn–C steels” Acta materialia 61, 558-578 (2013)
-
02
J.B. Seol, D Raabe, P Choi, H.S. Park, J.H. Kwak, C.G. Park
"Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe–Mn–Al–C alloy studied by transmission electron microscopy and atom probe tomography” Scripta Materialia 68, 348-353 (2013)
-
03
J.B. Seol, B.H. Lee, P Choi, S.G. Lee, C.G. Park
"Combined nano-SIMS/AFM/EBSD analysis and atom probe tomography, of carbon distribution in austenite/ε-martensite high-Mn steels” Ultramicroscopy 132, 248-257 (2013)
-
04
J.S. Kang, J.B. Seol, C.G. Park
"Three-dimensional characterization of bainitic microstructures in low-carbon high-strength low-alloy steel studied by electron backscatter diffraction” Materials characterization 79, 110-121 (2013)
2012
-
01
J.B. Seol, D. Raabe, P.P. Choi, Y.R. Im, C.G. Park
"Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic– austenitic TRIP steels” Acta Materialia. 60, 6183-6199 (2012)
2011
-
01
J.B. Seol, N.S. Lim, B.H. Lee, L Renaud, C.G. Park
"Atom probe tomography and nano secondary ion mass spectroscopy investigation of the segregation of boron at austenite grain boundaries in 0.5 wt.% carbon steels” Metals and Materials International 17, 413-416 (2011)
2010
-
01
S Das, J.B. Seol, Y.C. Kim, C.G. Park
"Formation of NiO nanowires on the surface of nickel strips” Journal of alloys and compounds 505, L19-L21 (2010)
-
02
J.B. Seol, G.H. Gu, N.S. Lim, S Das, C.G. Park
"Atomic scale investigation on the distribution of boron in medium carbon steels by atom probe tomography and EELS” Ultramicroscopy 110, 783-788 (2010)
-
03
S Das, N.S. Lim, J.B. Seol, H.W. Kim, C.G. Park
"Effect of the rolling speed on microstructural and mechanical properties of aluminum–magnesium alloys prepared by twin roll casting” Materials & design 31, 1633-1638 (2010)
-
04
S Das, J.B. Seol, Y.C. Kim, C.G. Park
"Structure and mechanical properties of Ni–Cr alloy produced by single roll strip casting” Materials & Design 31, 570-573 (2010)
International Journal
2022
-
01
A.K. Maurya, M. Nagamani, S.W. Kang, J.T. Yeom, J.K. Hong, H. Sung, C.H. Park, P.U.M. Reddy, N.S. Reddy
“Development of artificial neural networks software for arsenic adsorption from an aqueous environment” Environmental Research 203 (2022) 111846.
-
02
Y. Lee, E.S. Kim, S. Park, J.M. Park, J.B. Seol, H.S. Kim, T. Lee, H. Sung, J.G. Kim
“Effects of Laser Power on the Microstructure Evolution and Mechanical Properties of Ti–6Al–4V Alloy Manufactured by Direct Energy Deposition” Metals and Materials International 28 (2022) 197-204.
-
03
M.S. Lee, H. Kim, Y.T. Koo, J.H. Yu, H. Chung, N. Kim, H. Sung, I.D. Jung
“Selective Laser Melting Process for Sensor Embedding into SUS316L with Heat Dissipative Inner Cavity Design” Metals and Materials International 28 (2022) 297-305.
-
04
J. Han, J.S. Nam, S. Seo, A. Lee, C. Lee, S. Park, Y. Kang, H.S. Lee, D. Kim, Q. Zhang, H. Sung, E. I. Kauppinen, H. Jeong, J. W. Oh, S. Maruyama, I. D. Jung, I. Jeon
“Utilization of Multifunctional Environment‐Friendly Organic Dopants Inspired from Nature for Carbon Nanotube‐Based Planar Heterojunction Silicon Solar Cells”, Advanced Energy and Sustainability Research (2022) 2100155.
-
05
J. Jeong, M. Roscher, W. An, S. Son, J.B. Seol, H. Sung, H.S. Kim, E. Jägle, J.G. Kim
“Evolution of nanosized Cu-rich clusters in a Fe–15Cu–15Ni alloy produced by laser powder bed fusion”, Materials Science & Engineering A 832 (2022) 142462.
-
06
S. Park, S.H. Kayani, K. Euh, E. Seo, H. Kim, S. Park, B.N. Yadav, S.J. Park, H. Sung, I.D. Jung
“High Strength Aluminum Alloys Design via Explainable Artificial Intelligence”, Journal of Alloys and Compounds 903 (2022) 163828.
-
07
E. Seo, H. Sung, H. Kim, T. Kim, S. Park, M.S. Lee, S.K. Moon, J.G. Kim, H. Chung, S.K. Choi, J.H. Yu, K.T. Kim, S.J. Park, N. Kim, I.D. Jung
“AI Augmented Digital Metal Component”, Signal Processing (2022) submitted.
-
08
J. Oh, S. Park, H.J. Bae, S. Son, H.S. Kim, J.B. Seol, H. Sung, J.G. Kim
“Mechanical properties and microstructural evolution of high-pressure torsion-processed Al7075 alloy at elevated temperatures”, Materials Science & Engineering A 835 (2022) 142692.
-
09
M. Gwak, S. Kim, D.J. Lee, J.B. Seol, H. Sung, T.H. Nam, S. Kim, J.G. Kim
“Post-annealing effect on the tensile deformation mechanism of a Ti–6Al–4V alloy manufactured via directed energy deposition”, Materials Science & Engineering A 836 (2022) 142729.
-
10
J. Yang, Y.H. Jo, W. An, H.S. Kim, B.J. Lee, S. Lee, H. Sung, S.S. Sohn
“Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloy”, Acta Materialia 225 (2022) 117568.
-
11
K.K. Ko, J.H. Jang, S. Tiwari, H.J. Bae, H.K. Sung, J.G. Kim, J.B. Seol
“Quantitative Analysis of Retained Austenite in Nb Added Fe-based Alloy”, Applied Microscopy (2022) submitted.
-
12
T. Bak, K. Kim, E. Seo, J. Han, H. Sung, I. Jeon, I. D. Jung
“Accelerated Design of High-Efficiency Lead-Free Tin Perovskite Solar Cells via Machine Learning”, International Journal of Precision Engineering and Manufacturing-Green Technology (2022) 1-13.
-
13
S. H. Kayani, S. Park, J. G. Kim, J. B. Seol, H. Sung
“Direct observation of chemical short-range order in 25 wt% Mn steel via transmission electron microscopy”, Scripta Materialia 213 (2022) 114642.
-
14
H.J. Bae, K.K. Ko, M. Ishtiaq, H. Sung, J.G. Kim, J.B. Seol
“On the stacking fault forming probability and stacking fault energy in carbon-doped 17 at% Mn steels via transmission electron microscopy and atom probe tomography”, Journal of Materials Science & Technology 115 (2022) 177–188.
-
15
H.J. Bae, K.K. Ko, E.H. Park, M. Ishtiaq, H.S. Park, J.S. Jeong, J.G. Kim, H. Sung, J.B. Seol
“A feasible route to produce 1.1 GPa ferritic-based low-Mn lightweight steels with ductility of 47%”, Journal of Materials Science & Technology 117 (2022) 225-237.
2021
-
01
V. Sivanantham, P.L Narayana, K.J. Hyeong, P. Pareddy, V. Sangeetha, M.K. Seok, K.H. In, H. Sung, N.S. Reddy
“Modeling and optimization of chlorophenol rejection for spiral wound reverse osmosis membrane modules“, Chemosphere 268 (2021) 129345.
-
02
J.G. Kim, J.B. Seol, J.M. Park, H. Sung, S.H. Park, H.S. Kim
“Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels”, Metals and Materials International (2021) 1-9.
-
03
J. Oh, H.D. Park, M. Gwak, J. Lee, S. Son, A. Amanov, H.S. Kim, J.B. Seol, H. Sung, J.G. Kim
“Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification”,
Materials Science and Engineering A (2021) 141101.
-
04
K.K. Ko, H.J. Bae, S.W. Jung, H.K. Sung, J.G. Kim, J.B. Seol
“Measurement Method of Prior Austenite Grain Size of Nb-added Fe-based Alloys” Journal of Korean Powder Metallurgy Institute 28 (2021) 317-324.
-
05
J. Lee, H. Ha, J.B. Seol, J.G. Kim, E.H. Seo, S.K. Moon, H. Sung
"Reverse effect of hot isostatic pressing on high-speed selective laser melted Ti-6Al-4V alloy“, Materials Science and Engineering A 807 (2021) 140880.
-
06
H. Kim, H. Ha, J. Lee, S. Son, H.S. Kim, H. Sung, J.B. Seol, J.G. Kim
"Outstanding mechanical properties of ultrafine-grained Al7075 alloys by high-pressure torsion“, Materials Science and Engineering A 810 (2021) 141020.
-
07
J.W. Park, Y.C. Shin, H.G. Kang, S. Park, E. Seo, H. Sung, I.D. Jung
“In vivo analysis of post-joint-preserving surgery fracture of 3D-printed Ti-6Al-4V implant to treat bone cancer” Bio-Design and Manufacturing 4 (2021) 1-10.
-
08
E.T. Kim, M. Ishtiaq, J.C. Han, K.K. Ko, H.J. Bae, H. Sung, J.G. Kim, J.B. Seol
“Near atomic-scale comparison of passive film on a 17 wt% Cr-added 18 wt% Mn steel with those on typical austenitic stainless steels” Scripta Materialia 203 (2021) 114.
-
09
S. Kim, T. Song, H. Sung, S. Kim
“Effect of pre-straining on high cycle fatigue and fatigue crack propagation behaviors of precipitation hardened steel” Metals and Materials International 27 (2021) 1383-1391.
-
10
E. Seo, N. Kim, S.K. Moon, H. Sung, I.D. Jung
“Effect of Build Angle on Surface Roughness of High-Speed Selective Laser Melted Ti-6Al-4V Alloy” International Conference on Advanced Surface Enhancement (2021) 105-108.
-
11
D. Bae, J. Lee, J. Jeong, J.B. Seol, H. Sung, J.G. Kim
“Hydrogen-induced ordering on the deformation mechanism of the as-cast high-Mn steel” Materials Science and Engineering: A 825 (2021) 141923.
-
12
S. Kim, T. Song, H. Sung, S. Kim
“Effect of Pre-Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Complex Phase Steel” Metals and Materials International 27 (2021) 3810-3822.
-
13
S. Park, S.H. Kayani, H. Kim, I.D. Jung, N.S. Reddy, K. Euh, J.B. Seol, J.G. Kim, H. Sung
“Effect of Interdendritic Precipitations on the Mechanical Properties of GBF or EMS Processed Al-Zn-Mg-Cu Alloys” Crystals 11 (2021) 1162.
-
14
H.J. Bae, K.K. Ko, H.S. Park, J.S. Jeong, J.G. Kim, H. Sung, J.B. Seo
“Development of 1.2 GPa Ferrite-based Lightweight Steels via Low-temperature Tempering” Korean Journal of Metals and Materials 59 (2021) 695-703.
-
15
J. Jeong, Y. Lee, J.M. Park, D.J. Lee, I. Jeon, H. Sohn, H.S. Kim, T.H. Nam, H. Sung, J.B. Seol, J.G. Kim
“Metastable δ-ferrite and twinning-induced plasticity on the strain hardening behavior of directed energy deposition-processed 304L austenitic stainless steel” Additive Manufacturing 47 (2021) 102363.
2020
-
01
Y.H. Jo, J. Yang, K.Y. Doh, W. An, D.W. Kim, H. Sung, D. Lee, H.S. Kim, S.S. Sohn, S. Lee
“Analysis of damage-tolerance of TRIP-assisted V10Cr10Fe45Co30Ni5 high-entropy alloy at room and cryogenic temperatures”, Journal of Alloys and Compounds 844 (2020) 156090.
-
02
J. An, M. Lee, K.J. Euh, I.D. Jung, S. Kim, H. Sung
“Effect of exposure time on stress corrosion cracking susceptibility of Al-Zn-Mg-Cu alloys”, Science of advanced materials 12 (2020) 1665-1671.
-
03
W. An, J. Ham, T.W. Park, J. Son, I.D. Jung, S. Kim, H. Sung
“Effect of microstructure on stress corrosion cracking susceptibility of ultra-high strength steel”, Science of advanced materials 12 (2020) 1641-1647.
-
04
J. Lee, M. Lee, I.D. Jung, J. Choe, J.H. Yu, S. Kim, H. Sung
"Correlation between microstructure and tensile properties of STS 316L and Inconel 718 fabricated by Selective Laser Melting (SLM) “, Journal of Nanoscience and Nanotechnology 20 (2020) 6807-6814.
-
05
W. An, J. Heo, D. Jang, K.J. Euh, I.D. Jung, S. Kim, H. Sung
“Microstructural evolution of Al-Zn-Mg-Cu alloys in accordance with homogenization time”, Journal of Nanoscience and Nanotechnology 20 (2020) 6890-6896.
-
06
J.B. Seol, J.W. Bae, J.G. Kim, H. Sung, Z. Li, H.H. Lee, S.H. Shim, J.H. Jang, W.S. Ko, S.I. Hong, H.S. Kim
“Short-range order strengthening in boron-doped high-entropy alloys for cryogenic applications”, Acta Materialia 194 (2020) 366-377.
-
07
D. Kim, J. Lee, M. Lee, H.J. Son, NS Reddy, M. Kim, S.K. Moon, K.T. Kim, J.H. Yu, S. Kim, S.J. Park, H. Sung
“Artificial Intelligence for the Prediction of Tensile Properties by Using Microstructural Parameters in High Strength Steels”, Materialia 11 (2020) 100699-100711.
-
08
S. Kim, T. Song, H. Sung, S. Kim
“Effect of Pre‑Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Complex Phase Steel”, Metals and Materials International 1 (2020).
-
09
I.D. Jung, M.S. Lee, J. Lee, H. Sung, J. Choe, H.J. Son, J. Yun, K. Kim, M. Kim, S.W. Lee, S. Yang, S.K. Moon, K.T. Kim, J.H. Yu
“Embedding Sensors using Selective Laser Melting for Self-Cognitive Metal Parts”, Additive Manufacturing 33 (2020) 101151-101159.
2019
-
01
Y.H. Jo, K.Y. Doh, D.G. Kim, K. Lee, D.W. Kim, H. Sung, S.S. Sohn, D. Lee, H.S. Kim, B. Lee, S. Lee
“Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy”, Journal of the Mechanics and Physics of Solids 809 (2019) 151864-151872.
-
02
S. Kim, T. Song, H. Sung, S. Kim
“Effect of Pre‑Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Precipitation Hardened Steel”, Metals and Materials International 25 (2019) 43474.
-
03
H. Choi, S. Kim, H. Sung, S. Kim, S.J. Kim
“Effect of Cr and N on Stress Corrosion Cracking Behavior of Fe-18Mn Steel”, Korean Journal of Metals and Materials 57 (2019) 624-631.
-
04
J. Lee, J. Choe, J. Park, J.H. Yu, S. Kim, I.D. Jung, H. Sung
“Microstructural Effects on the Tensile and Fracture Behavior of Selective Laser Melted H13 Tool Steel under Varying Conditions”, Materials Characterization 155 (2019) 109817-109826.
-
05
A. Jeon, H.I. Kim, H. Sung, N.S. Reddy
“Modeling the Density and Hardness of AA2024-SiC Nanocomposites”, Journal of Korean Powder Metallurgy Institute 26 (2019) 275-281.
-
06
J. Park, K. Lee, H. Sung, Y.J. Kim, S.K. Kim, S. Kim
“J-integral Fracture Toughness of High-Mn Steels at Room and Cryogenic Temperatures”, Metallurgical and Materials Transactions A 50 (2019) 2678-2689.
-
07
W. An, D. Kim, B.H. Kim, S.K. Kim, S. Kim, H. Sung
“Effects of Exposure Temperature on Tensile and Charpy Impact Properties of the 7xxx Aluminum Alloy for Aerospace Applications”, Korean Journal of Metals and Materials 57 (2019) 214-226.
-
08
H. Sung, K. Lee, D. Jeong, Y. Kim, S. Kim
“High-Cycle Fatigue Behavior of High-Mn Steel/304L Stainless Steel Welds at Room and Cryogenic Temperatures”, Metallurgical and Materials Transactions A 50 (2019) 1261-1272.
-
09
Y.H. Jo, W.M. Choi, D.G. Kim, A. Zargaran, K. Lee, H. Sung, S.S. Sohn, H.S. Kim, B.J. Lee, S. Lee
“Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy”, Materials Science and Engineering A 743 (2019) 665-674.
2018
-
01
S. Ahn, D. Jeong, Y. Kwon, M. Goto, H. Sung, S. Kim
“Environmental fatigue crack propagation behavior of beta-annealed Ti-6Al-4V alloy in NaCl solution under controlled potentials”, International Journal of Fatigue 111 (2018) 186-195.
-
02
S. Ahn, J. Park, D. Jeong, H. Sung, Y. Kwon, S. Kim
“Effect of Cooling Rate on SCC Susceptibility of β-Processed Ti–6Al–4V Alloy in 0.6M NaCl Solution”, Metals and Materials International 24 (2018) 327-336.
-
03
W. An, J. Park, J. Lee, J. Choe, I.D. Jung, J.H. Yu, S. Kim, H. Sung
“Correlation between Microstructure and Mechanical Properties of the Additive Manufactured H13 Tool Steel”, Korean journal of materials research 28 (2018) 663-670.
-
04
S. Kim, D. Jeong, H. Sung
“Reviews on factors affecting fatigue behavior of high-Mn steels” Metals and Materials International 24 (2018) 1-14.
-
05
D. Jeong, J. Park, S. Ahn, H. Sung, Y. Kwon, S. Kim
“Effect of stabilization annealing on SCC susceptibility of beta-annealed Ti-6Al-4V alloy in 0.6 M NaCl solution”, Metals and Materials International 24 (2018) 101-111.
2017
-
01
H. Sung, D.H. Lee, S. Lee, B.J. Lee, S.P. Hong, Y.W. Kim, J.Y. Yoo, B. Hwang, S.Y. Shin
“Effects of C and Si on strain aging of strain-based API X60 pipeline steels”, Metals and Materials International 23 (2017) 450-458.
-
02
W. Seo, D. Jeong, H. Sung, S. Kim
“Tensile and high cycle fatigue behaviors of high-Mn steels at 298 and 110K”, Materials Characterization 124 (2017) 65-72.
-
03
K. Jang, H. Kim, G. Kim, S. Kim, H. Jung, S. Jeon, S. Hong, P. Yi, S. Jang, J. Seo, S. Sivarkumar, J. Park, H. Sung, E. Jung
“A study on Optimum Condition investigation of COD Mn Removal Efficiency in Treating Livestock wastewater by Electrolysis and Electro-coagulation using SUS316 Electrode”, 한국도시환경학회지 17 (2017) 299-308.
-
04
W. Seo, D. Jeong, D. Lee, H. Sung, Y. Kwon, S. Kim
“Effects of cooling rate and stabilization annealing on fatigue behavior of β-processed Ti-6Al-4V alloys”, Metals and Materials International 23 (2017) 648-659.
2016
-
01
D. Jeong, W. Seo, H. Sung, S. Kim
“Near-threshold fatigue crack propagation behavior of austenitic high-Mn steels”, Materials Characterization 121 (2016) 103-111.
-
02
H. Sung, D. Jeong, T. Park, J. Lee, S. Kim
“S-N fatigue behavior of Fe25Mn steel and its weld at 298 and 110 K”, Metals and Materials International 22 (2016) 755-763.
-
03
D. Jeong, H. Sung, T. Park, J. Lee, S. Kim
“Fatigue crack propagation behavior of Fe25Mn and Fe16Mn2Al steels at room and cryogenic temperatures”, Metals and Materials International 22 (2016) 601-608.
-
04
D. Jeong, S. Hyun, H. Sung, Y. Kwon, S. Kim
“Effect of superplastic forming exposure on tensile and S-N fatigue behavior of Ti64 alloy”, Metals and Materials International 22 (2016) 594-600.
-
05
H. Sung, D.H. Lee, S. Lee, H.S. Kim, Y. Ro, C.S. Lee, B. Hwang, S.Y. Shin
“Correlation between microstructures and tensile properties of strain-based API X60 pipeline steels”, Metallurgical and Materials Transactions A 47 (2016) 2726-2738.
Under Review & Accepted
-
01
T. Kim, J.G. Kim, S. Park, S.J. Park, H.S. Kim, N. Kim, H. Ha, H. Sung, I.D. Jung
“Convolutional neural network for the optimal surface quality of Ti–6Al–4V in directed energy deposition” ADDITIVE MANUFACTURING Under Review.
-
02
H.D. Park, J.W. Won, J. Moon, H.S. Kim, H. Sung, J.B. Seol, J.W. Bae, J.G. Kim
“Fe55Co17.5Ni10Cr12.5Mo5 high-entropy alloy with outstanding cryogenic mechanical properties driven by deformation-induced phase transformation behavior” METALS AND MATERIALS INTERNATIONAL Accepted
-
03
S. Li, J.-H. Lim, I.U. Rehman, W.-T. Lee, J.G. Kim, J.S. Oh, T. Lee, T.-H. Nam
“Tuning the texture characteristics and superelastic behaviors of Ti–Zr–Nb–Sn shape memory alloys by varying Nb content” SCRIPTA MATERIALIA Unver Review.
-
04
S. Kim, H. Oh, J.G. Kim, S. Kim
“Environment-assisted fatigue crack propagation behavior of Ti64 alloy fabricated by direct energy deposition process” METALLURGICAL AND MATERIALS TRANSACTIONS A Under Review.
-
05
K.M. Kim, J.B. Byun, J. Jeong, J.G. Kim, S.M. Hong, K.H. Lee, W.J. Chung, M.S. Joun
“Fracture mechanism of SWCH25F rod shearing in automatic multi-stage cold forging and critical shearing speed” INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Under Review.
-
06
T.K. Sinha, H.R. Chothe, J.H. Lim, J.G. Kim, T. Lee, T. Nam, J.S. Oh
“Fabricating efficient and biocompatible filament for material extrusion-based low-cost additive manufacturing: A case study with steel“ MACROMOLECULAR RESEARCH Under Review.
International Journal
2022
-
01
S. Li, Y.-W. Kim, M.-S. Choi, J. G. Kim, T.-H. Nam
“Superelasticity, microstructure and texture characteristics of the rapidly solidified Ti–Zr–Nb–Sn shape memory alloy fibers for biomedical applications” MATERIALS SCIENCE AND ENGINEERING A 831 (2022) 142001.
-
02
J. Jeong, M. Roscher, W. An, J.B. Seol, H. Sung, E. Jägle, J.G. Kim
“Evolution of nanosized Cu-rich clusters in a Fe-15Cu-15Ni alloy produced by laser powder bed fusion” MATERIALS SCIENCE AND ENGINEERING A 832 (2022)142462.
-
03
Y. Lee, E.S. Kim, S. Park, J.M. Park, J.B. Seol, H.S. Kim, T. Lee, H. Sung, J.G. Kim
“The effects of laser power on the microstructure evolution and mechanical properties of Ti-6Al-4V alloy manufactured by direct energy deposition” METALS AND MATERIALS INTERNATIONAL 28 (2022) 197-204.
-
04
S. Kim, H. Oh, J.G. Kim, S. Kim
“Effect of annealing and crack orientation on fatigue crack propagation of Ti64 alloy fabricated by direct energy deposition (DED) process” METALS AND MATERIALS INTERNATIONAL 28 (2022) 205-215.
-
05
J.-H. Kim, J.-H. Lim, J.G. Kim, J.S. Oh, T. Lee, M.-S. Kim, S. Li, T.-H. Nam
“Microstructure, transformation behavior and superelasticity of an aged Ti-40Ni-12Cu (at%) shape memory alloy” JOURNAL OF ALLOYS AND COMPOUNDS 900 (2022) 163390.
-
06
S.J. Park, S.-H. Jo, J.G. Kim, J. Kim, R. Lee, Y.-S. Oh, S.-J. Kim, H.W. Lee, S.-H. Kang, J. Jung
“Evolution of microstructure, mechanical properties and residual stress of a cold rolled invar sheet due to heat treatment” METALS 12 (2022) 110.
-
07
J. Oh, S. Park, H.J. Bae, S. Son, H.S. Kim, J.B. Seol, H. Sung, J.G. Kim
“Mechanical properties and microstructural evolution of high-pressure torsion-processed Al7075 alloy at elevated temperatures” MATERIALS SCIENCE AND ENGINEERING A 835 (2022) 142692.
-
08
M. Gwak, S. Kim, D.J. Lee, J.B. Seol, H. Sung, T.-H. Nam, S. Kim, J.G. Kim
“Post-annealing effect on the tensile deformation mechanism of a Ti-6Al-4V alloy manufactured via directed energy deposition” MATERIALS SCIENCE AND ENGINEERING A 836 (2022) 142729.
-
09
H. J. Bae, K.K. Ko, M. Ishtiaq, H. Sung, J.G. Kim, J.B. Seol
“On the stacking fault forming probability and stacking fault energy in carbon-doped 17 at% Mn steels via transmission electron microscopy and atom probe tomography” JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY 115 (2022) 177-188.
-
10
H. Oh, S. Kim, J.G. Kim, F. Taleghani, S. Kim
“Low cycle fatigue behavior of Inconel 706 at 650 ℃” JOURNAL OF RESEARCH AND TECHNOLOGY 17 (2022) 2624-2635.
-
11
K.K. Ko, H.J. Bae, E.H. Park, H.-U. Jeong, H.S. Park, J.S. Jeong, J.G. Kim, H. Sung, N. Park, J.B. Seol
“A feasible route to produce 1.1 GPa ferritic-based low-Mn lightweight steels with ductility of 47%” JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY 115 (2022) 225-237.
-
12
S.H. Kayani, S. Parrk, J.G. Kim, J.B. Seol, H. Sung
“Direct observation of chemical short-range order in 25 wt% Mn steel via transmission electron microscopy” SCRIPTA MATERIALIA 215 (2022) 114642.
-
13
T.K. Sinha, J.H. Lim, H.R. Chothe, J.G. Kim, T. Nam, T. Lee, J.S. Oh
“Polyvinyl pyrrolidone (PVP) as an efficient and biocompatible binder for metal alloy processing: A case study with Ti-20Zr-11Nb-3Sn” JOURNAL OF APPLIED POLYMER SCIENCE 139 (2022) e52396.
-
14
J.-H. Shim, J.-H. Kim, J.-H. Lim, J.G. Kim, J.S. Oh, T. Lee, S. Li, T.-H. Nam
“Improvement in the superelasticity of a Ti–35.5Ni–15Cu (at.%) alloy using Ti(Ni,Cu)2 phase” MATERIALS SCIENCE AND ENGINEERING A 847 (2022) 143346.
-
15
D.-G. Kim, Y. Jo, Y.-S. Lee, Y.-Y. Kim, H.-W. Kim, J.G. Kim
“Effect of Cu on the microstructure of Al-8Zn-2.5Mg-xCu alloys fabricated by twin roll casting” KOREAN JOURNAL OF METALS AND MATERIALS 60 (2022) 329-339.
-
16
K.K. Ko, J.H. Jang, S. Tiwari, H.J. Bae, H. Sung, J.G. Kim, J.B. Seol
“Quantitative analysis of retained austenite in Nb added Fe-based alloy” APPLIED MICROSCOPY 52 (2022) 5.
-
17
M. Gwak, J.Y. Park, S.G. Jeong, J.B. Seol, H. Sung, S. Kim, H.S. Kim, J.G. Kim
“Optimization of laser-powder bed fusion processed Fe-4.5Si alloy via response surface methodology”, STEEL RESEARCH INTERNATIONAL (2022) ACCEPTED.”
-
18
S.H. Kayani, S. Park, K. Euh, J.B. Seol, J.G. Kim, H. Sung
“Dislocation-aided electrochemical behavior of precipitates in stress corrosion cracking of Al–Zn–Mg–Cu alloys” MATERIALS CHARACTERIZATION 190 (2022) 112019.”
-
19
Y. Lee, S. Li, E.S. Kim, D.J. Lee, J.B. Seol, H. Sung, H.S. Kim, T. Lee, J.S. Oh, T.-H. Nam, J.G. Kim
“Transformation-induced plasticity in the heterogeneous microstructured Ti-Zr-Nb-Sn alloy via in-situ alloying” ADDITIVE MANUFACTURING 58 (2022) 102990.”
2021
-
01
J.G. Kim, J.W. Bae, J.M. Park, W. Woo, S. Harjo, S. Lee, H.S. Kim
“Effect of the difference in strength of hard and soft components on the synergetic strengthening of layered materials” METALS AND MATERIALS INTERNATIONAL 27 (2021) 376-383.
-
02
J. Lee, H. Ha, J.B. Seol, J.G. Kim, E.H. Seo, S.K. Moon, I.D. Jung, H. Sung
“Reverse effect of hot isostatic pressing on high-speed selective laser melted Ti-6Al-4V alloy” MATERIALS SCIENCE AND ENGINEERING A 807 (2021) 140880.
-
03
J.G. Kim, J.B. Seol, J.M. Park, H. Sung, S.H. Park, H.S. Kim,
“Effects of cell network structure on the strength of additively manufactured stainless steels” METALS AND MATERIALS INTERNATIONAL 27 (2021) 2614-2622.
-
04
H. Kim, H. Ha, J. Lee, S. Son, H.S. Kim, H. Sung, J.B. Seol, J.G. Kim
"Outstanding mechanical properties of ultrafine-grained Al7075 alloys by high-pressure torsion” MATERIALS AND SCIENCE AND ENGINEERING A 810 (2021) 141020.
-
05
J. Oh, H.D. Park, M. Gwak, J. Lee, S. Son, A. Amanov, H.S. Kim, J.B. Seol, H. Sung, J.G. Kim
“Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification” MATERIALS SCIENCE AND ENGINEERING A 812 (2021) 141101.
-
06
M. Abramova, A. Raab, R.Z. Valiev, A. Khannanova, C.S. Lee, J.N. Kim, G.H. Jang, J.G. Kim, H.S. Kim, O. Renk, N. Enikeev
“Tailoring extra-strength of a TWIP steel by combination of multi-pass equal-channel angular pressing and warm rolling” METALS 11 (2021) 518.
-
07
E.T. Kim, K.K. Ko, M. Ishtiaq, H.J. Bae, H. Sung, J.G. Kim, J.B. Seol
“Near atomic-scale comparison of passive film on a 17 wt% Cr-added 18 wt% Mn steel with those on typical austenitic stainless steels” SCRIPTA MATERIALIA 203 (2021) 114112.
-
08
S. Li, I.U. Rehman, J.-H. Lim, W.-T. Lee, J.B. Seol, J.G. Kim, T.-H. Nam
“Effect of Sn content on microstructure, texture evolution, transformation behavior, and superelastic properties of Ti‒20Zr‒9Nb‒(2‒5)Sn (at.%) shape memory alloys” MATERIALS SCIENCE AND ENGINEERING A 827 (2021) 141994.
-
09
D. Bae, J. Lee, J. Jeong, J. B. Seol, H. Sung, J. G. Kim
“Hydrogen-induced ordering on the deformation mechanism of the as-cast high-Mn steel” MATERIALS SCIENCE AND ENGINEERING A 825 (2021) 141923.
-
10
S. Park, S.H. Kayani, H. Kim, I.D. Jung, N.S. Reddy, K. Euh, J.B. Seol, J.G. Kim, H. Sung
“Effect of interdendritic precipitations on the mechanical properties of GBF or EMS processed Al-Zn-Mg-Cu alloys” CRYSTALS 11 (2021) 1162.
-
11
J. Jeong, Y. Lee, J.M. Park, D.J. Lee, I. Jeon, H. Sohn, H.S. Kim, T.-H. Nam, H. Sung, J.B. Seol, J.G. Kim
“Metastable δ-ferrite and twinning-induced plasticity on the strain hardening behavior of directed energy deposition-processed 304L austenitic stainless steel” ADDITIVE MANUFACTURING 47 (2021) 102363.
-
12
H.J. Bae, K.K. Ko, H.S. Park, J.S. Jeong, J.G. Kim, H. Sung, J.B. Seol
“Development of 1.2 GPa ferrite-based lightweight steels via low-temperature tempering” KOREAN JOURNAL OF METALS AND MATERIALS 59 (2021) 683-691.
2020
-
01
D.H. Kim, Y. Seong, J.G. Kim, J. Lee, M.H. Seo, H. Hwang, H.S. Kim
“Analysis of bending behavior of TiN particle-reinforced martensitic steel using micro-digital image correlation” MATERIALS SCIENCE AND ENGINEERINGA 794 (2020) 139965
-
02
J.G. Kim, J.B. Seol, J.W. Bae, H.S. Kim
“On the mechanistic understanding of annealing-induced strength enhancement of ultrafine-grained high-Mn steel” MATERIALIA 13 (2020) 100837
-
03
J.M. Park, J. Choe, H.K. Park, S. Son, J. Jung, T.-S. Kim, J.-H. Yu, J.G. Kim, H.S. Kim
“Synergetic strengthening of additively manufactured (CoCrFeMnNi)99C1 high-entropy alloy by heterogeneous anisotropic microstructure” ADDITIVE MANUFACTURING 35 (2020) 101333
-
04
J.B. Seol, J.W. Bae, J.G. Kim, H. Sung, Z. Li, H.H. Lee, S.H. Shim, J.H. Jang, W.-S. Ko, S.I. Hong, H.S. Kim
“Short-range order strengthening in boron-doped high-entropy alloys for cryogenic applications” ACTA MATERIALIA 194 (2020) 366-377
-
05
J.G. Kim, H.J. Seo, J.M. Park, S.M. Baek, A. Amanov, C.S. Lee, H.S. Kim
“The role of ultrasonic nanocrystalline surface modification at elevated temperature on the hydrogen charging behavior of high-Mn steels” MATERIALIA 9 (2020) 100626
-
06
J.W. Bae, J. Jung, J.G. Kim, J.M. Park, S. Harjo, T. Kawasaki, H.S. Kim
“On the phase transformation and dynamic stress-strain partitioning of ferrous medium-entropy alloy using experimentation and finite element method” MATERIALIA 9 (2020) 100619
-
07
J.G. Kim, J.M. Park, J.B. Seol, J. Choe, J.-H. Yu, S. Yang, H.S. Kim
“Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy” MATERIALS SCIENCE AND ENGINEERING A 773 (2020) 138726
-
08
N. Saeldl, M. Jafari, J.G. Kim, F. Ashrafizadeh, H.S. Kim
"Development of an Advanced Ultrahigh Strength TRIP Steel and Evaluation of Its Unique Strain Hardening Behavior" METALS AND MATERIALS INTERNATIONAL 26 (2020) 168-178
-
09
J.M. Park, J. Choe, J.G. Kim, J.W. Bae, J. Moon, S. Yang, K.T. Kim, J.-H. Yu, H.S. Kim
“Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting” MATERIALS RESEARCH LETTERS 8 (2020) 1-7
2019
-
01
J.G. Kim, J.H. Moon, A. Amanov, H.S. Kim
“Strength and Ductility Enhancement in the Gradient Structured Twinning-Induced Plasticity Steel by Ultrasonic Nanocrystalline Surface Modification” MATERIALS SCIENCE AND ENGINEERING A 739 (2019) 105-108
-
02
J.G. Kim, J.W. Bae, J.M. Park, W. Woo, S. Harjo, K.-G. Chin, S. Lee, H.S. Kim
“Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test” SCIENTIFIC REPORTS 9 (2019) 6829
-
03
J.G. Kim†, M.J. Jang†, H.K. Park, K.-G. Chin, S. Lee, H.S. Kim
“Back-stress effect on the mechanical strength of TWIP-IF steels layered sheet” METALS AND MATERIALS INTERNATIONAL 25 (2019) 912-917
-
04
J.W. Bae, J.G. Kim, J.M. Park, W. Woo, S. Harjo, H.S. Kim
“In situ neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loading” SCRIPTA MATERIALIA 165 (2019) 60-63
-
05
J.M. Jeon, J.M. Park, J.-H.Yu, J.G. Kim, Y. Seong, S.H. Park, H.S. Kim
“Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel” MATERIALS SCIENCE & ENGINEERING A 763 (2019) 138152
2018
-
01
J.G. Kim†, H.Y. Um†, J.Y. Kang, H.J. Jeong, K.H. Choi, S.-H. Lee, S.-Y. Kim, J.-S. Chung, H.S. Kim
“Quantitative Study on Yield Point Phenomenon of Low Carbon Steels Processed by Compact Endless Casting and Rolling” MATERIALS SCIENCE AND ENGINEERING A 734 (2018) 408-415
-
02
P. Sathiyamoorthi, J.W. Bae, P. Asghari-Rad, J.M. Park, J.G. Kim, H.S. Kim
“Effect of annealing on microstructure and tensile behavior of CoCrNi medium entropy alloy processed by high-pressure torsion” ENTROPY 20 (2018) 849
-
03
J.G. Kim, S.M. Baek, H.H. Lee, K.-G. Chin, S. Lee, H.S. Kim
Suppressed Deformation Instability in the Twinning-Induced Plasticity Steel-Cored Three-Layer Steel Sheet” ACTA MATERIALIA 147 (2018) 304-312
-
04
J.G. Kim, J.I. Yoon, S.M. Baek, M.H. Seo, K.-G. Chin, S. Lee, H.S. Kim
“Stretch-Flangeability of Twinning-Induced Plasticity Steel-Cored Three-Layer Steel Sheet” JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 258 (2018) 220-225
-
05
S.M. Baek, J.G. Kim, J.I. Yoon, M.H. Seo, W.T. Cho, K.-G. Chin, S. Lee, H.S. Kim
“Deep Drawing Behavior of Twinning-Induced Plasticity-Cored Three-Layer Steel Sheet” INTERNATIONAL JOURNAL OF MATERIAL FORMING 11 (2018) 11-18
-
06
J.G. Kim†, N.A. Enikeev†, J.B. Seol, M.M. Abramova, M.V. Karavaeva, R.Z. Valiev, C.G. Park, H.S. Kim
“Superior Strength and Multiple Strengthening Mechanisms in Nanocrystalline TWIP Steel” SCIENTIFIC REPORTS 8 (2018) 11200
-
07
J.B. Seol†, J.W. Bae†, Z. Li, J.C. Han, J.G. Kim, D. Raabe, H.S. Kim
“Boron Doped Ultrastrong and Ductile High-Entropy Alloys” ACTA MATERIALIA 151 (2018) 366-376
2017
-
01
M. Jane?ek, P. Minarik, T. Kraj?ak, K. Vaclavova, J. Strasky, J. ?i?ek, M. Vl?ek, J. Vesely, J.G. Kim, H.S. Kim
“Mechanical properties and microstructure of magnesium alloy Mg22Gd processed by severe plastic deformation” ADVANCED MATERIALS LETTERS 8 (2017) 897-904
-
02
J.M. Jung, J.I. Yoon, J.G. Kim, M. Latypov, J.Y. Kim, H.S. Kim,
“Continuum Understanding of Twin Formation Near Grain Boundaries of FCC Metals with Low Stacking Fault Energy” NPJ COMPUTATIONAL MATERIALS 3 (2017) 21
-
03
J.G. Kim, S.M. Baek, J.I. Yoon, M.H. Seo, W.T. Cho, K.-G. Chin, S. Lee, H.S. Kim
“Stretchability and Drawability of Twinning-Induced Plasticity Steel-Cored Three-Layer Steel Sheets” JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 250 (2017) 357-362
-
04
J.G. Kim, N.A. Enikeev, M.M. Abramova, B.H. Park, R.Z. Valiev, H.S. Kim
“Effect of Initial Grain Size on the Microstructure and Mechanical Properties of High-Pressure Torsion Processed Twinning-Induced Plasticity Steels” MATERIALS SCIENCE AND ENGINEERING A 682 (2017) 164-167
-
05
J.G. Kim, J.I. Yoon, S.M. Baek, M.H. Seo, W.T. Cho, K.-G. Chin, S. Lee, H.S. Kim
“Residual Stress Effect on the Delayed-Fracture of Twinning-Induced Plasticity Steels” METALLURGICAL AND MATERIALS TRANSACTIONS A 48 (2017) 2692-2696
-
06
J.I. Yoon, J. Jung, J.G. Kim, S.S. Shon, S. Lee, H.S. Kim
“Key Factors of Stretch-Flangeability of Sheet Materials” JOURNAL OF MATERIALS AND SCIENCE 52 (2017) 7808-7823
-
07
J.B. Seol†, J.G. Kim†, S.H. Na, C.G. Park, H.S. Kim
“Deformation rate controls atomic-scale dynamic strain aging and phase transformation in high Mn TRIP steels” ACTA MATERIALIA 131 (2017) 187-196
-
08
J.G. Kim, S.M. Baek, W.T. Cho, T.J. Song, K.-G. Chin, S. Lee, H.S. Kim
“On the Rule-of-Mixtures of the Hardening Parameters in TWIP-Cored Three-Layer Steel Sheet” METALS AND MATERIALS INTERNATIONAL 23 (2017) 459-464
-
09
J. Cizek, P. Hruska, T. Vlasak, M. Vlcek, M. Janecek, P. Minarik, T. Krajnak, M. Slapakova, M. Dopita, R. Kuzel, T. Kmjec, J.G. Kim, H.S. Kim
“Microstructure Development of Ultra Fine Grained Mg-22 wt%Gd Alloy Prepared by High Pressure Torsion” MATERIALS SCIENCE AND ENGINEERING A 704 (2017) 181-191
2016
-
01
J.Y. Kang, J.G. Kim, H.W. Park, H.S. Kim
“Multiscale Architectured Materials with Composition and Grain Size Gradients Manufactured using High-Pressure Torsion” SCIENTIFIC REPORTS 6 (2016) 26590
-
02
J.Y. Kang, J.G. Kim, S.K. Kim, K.-G. Chin, S. Lee, H.S. Kim
“Outstanding Mechanical Properties of High-Pressure Torsion Processed Multiscale TWIP-Cored Three Layer Steel Sheet” SCRIPTA MATERIALIA 123 (2016) 122-125
-
03
M. Shahbaz, N. Pardis, J.G. Kim, R. Ebrahimi, H.S. Kim
“Experimental and Finite Element Analyses of Plastic Deformation Behavior in Vortex Extrusion” MATERIALS SCIENCE AND ENGINEERING A 674 (2016) 472-479
-
04
B.H. Park, H.Y. Um, J.G. Kim, D.J. Lee, H.Y. Jeong, S. Lee, H.S. Kim
“Large Deformation Behavior of Twin-Induced Plasticity Steels Under High-pressure Torsion” METALS AND MATERIALS INTERNATIONAL 22 (2016) 1003-1008
-
05
J.M. Jung, J.G. Kim, M.I. Latypov, H.S. Kim
“Effect of the Interfacial Condition on the Texture of Cu Near the Interface of Al/Cu Composites During Multi-Pass Caliber Rolling” MATERIALS AND DESIGN 82 (2015) 28-36
-
06
S.S. Shon, H. Song, J.G. Kim, J.-H. Kwak, H.S. Kim, S. Lee
“Effects of annealing treatment prior to cold rolling on delayed fracture properties in ferrite-austenite duplex lightweight steels” METALLURGICAL AND MATERIALS TRANSACTIONS A 47 (2016) 706-717
-
07
M.M. Abramova, N.A. Enikeev, J.G. Kim, R.Z. Valiev, M.V. Karavaeva, H.S. Kim
“Structural and phase transformation in a TWIP steel subjected to high pressure torsion” MATERIALS LETTERS 166 (2016) 321-324
-
08
J.I. Yoon, J.G. Kim, J.M. Jung, D.J. Lee, H.J. Jeong, H.S. Kim
“Obtaining Reliable True Stress-Strain Curves in a Wide Range of Strains Using Digital Image Correlation in Tensile Testing” KOREAN JOURNAL OF METALS AND MATERIALS 54 (2016) 231-236
2015
-
01
J.G. Kim, M.I. Latypov, D.J. Lee, H.-G. Jeong, J.B. Lee, S. Lee, H.S. Kim
“Plastic Deformation Behavior and Microstructural Evolution of Al-Core/Cu-Sheath Composites in Multi-Pass Caliber Rolling” METALLURGICAL AND MATERIALS TRANSACTIONS A 46 (2015) 260-269
-
02
J.G. Kim, S. Hong, N.Anjabin, B.H. Park, S.K. Kim, K.-G. Chin, S. Lee, H.S. Kim
“Outstanding Mechanical Properties of High-Pressure Torsion Processed Multiscale TWIP-Cored Three Layer Steel Sheet” SCRIPTA MATERIALIA 123 (2016) 122-125
-
03
J.G. Kim, M.I. Latypov, N. Pardis, Y.E. Beygelzimer, H.S. Kim
“Finite element analysis of the plastic deformation in tandem process of simple shear extrusion and twist extrusion” MATERIALS AND DESIGN 83 (2015) 858-865
2008
-
01
Lee, T. Jung, J.G. Kim, S. Ro, C. Kim, Y. Lee, Y. Kim, J. Lee, M. Kang
“The relationship between photo-catalytic performance and optical property over Si-incorporated TiO2” JOURNAL OF INDUSTURAL AND ENGINEERING CHEMISTRY 14 (2008) 869-873
DOMESTIC JOURNAL
-
01
J.G. Kim, B.H. Park, S.K. Kim, K.G. Chin, H.S. Kim
“Finite element analysis of the R-value of a 2-layer clad steel” TRANSACTIONS OF MATERIALS PROCESSING 23 (2014) 311-316.
-
02
M. Shahbaz, J.G. Kim, R. Ebrahimi, H.S. Kim
“Prediction of extrusion pressure in vortex extrusion using a streamline approach” IRANIAN JOURNAL OF MATERIALS FORMING 4 (2017) 52-62.
-
03
J.M. Park, J.M. Jeon, J.G. Kim, Y. Seong, S.H. Park, H.S. Kim
“Effect of remaining porosity on mechanical anisotropy of 316L austenitic stainless steel additively manufactured by selective laser melting” JOURNAL OF KOREAN POWDER METALLURGY INSTITUTE 25 (2018) 475-481.
-
04
Y. Lee, M.-S. Choi, E.B. Park, J.S. Oh, T.-H. Nam, J.G. Kim
“Property of the Spheroidized Zr Powder by Radio Frequency Plasma Treatment” JOURNAL OF KOREAN POWDER METALLURGY INSTITUTE 28 (2021) 97-102.
-
05
K.K. Ko, H.J. Bae, S.W. Jung, H. Sung, J.G. Kim, J.B. Seol
“Measurement method of prior austenite grain size of Nb-added Fe-based alloys” JOURNAL OF KOREAN POWDER METALLURGY INSTITUTE 28 (2021) 317-324.
-
06
Y. Lee, E.S. Kim, S.-H. Chun, J.B. Seol, H. Sung, J.S. Oh, H.S. Kim, T. Lee, T.-H. Nam, J.G. Kim
“Additive manufacturing optimization of directed energy deposition-processed Ti-6Al-4V alloy using energy density and powder deposition density” JOURNAL OF KOREAN POWDER METALLURGY INSTITUTE 28 (2021) 491-496.
-
07
D.H. Bae, J.H. Oh, C. Jeong, J.G. Kim
“Correlation between tensile-compressive behavior and formability of Al7050 alloy” TRANSACTIONS OF MATERIALS PROCESSING (2022) 31 (2022) 64-72.