Publications

“Rebuild the Materials”

Conference

PublicationsConference

Conference ( International )

2021
  • 01 Jung Gi Kim, Hyun Joo Seo, Jeong Min Park, Seung Mi Baek, Auezhan Amanov, Chong Soo Lee, Hyoung Seop Kim
    Hydrogen Charging Behavior of Gradient Structured High-Mn Steels, TMS 2021
    (Virtual Conference, 미국)
2020
  • 01 Woojin An, Im Doo Jung, Sangshik Kim, Hyokyung Sung
    Microstructural Effect on Stress Corrosion Cracking Susceptibility of 1.8 GPa High Strength Steels, ICAMR 2020
    (오키나와, 일본)
  • 02 Jungsub Lee, Im Doo Jung, Sangshik Kim, Hyokyung Sung,
    Effect of Build Orientation on the Tensile Ductility of Selective Laser Melted Ti-6Al-4V alloys, ICAMR 2020
    (오키나와, 일본)
  • 03 Sumin Kim, Taejin Song, Hyokyung Sung, Jehyun Lee, Sangshik Kim
    Effect of Pre-straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors CP (Complex Phase) steel TMS2020
    (샌디에이고, 미국)
  • 04 Jungsub Lee, Woojin An, Imdoo Jung, Jusik Kim, Sangshik Kim, Hyokyung Sung
    Effects of the Energy Density and Building Angle on the Tensile Properties of SLM Ti-6Al-4V Alloys TMS2020
    (샌디에이고, 미국)
  • 05 Jung Gi Kim, Jeong Min Park, Jae Bok Seol, Jungho Choe, Ji-Hun Yu, Sangsun Yang, Hyoung Seop Kim
    The Role of Solute Heterogeneities on the Mechanical Property of the Selectively Laser Melted C-doped CoCrFeMnNi Alloy, ISNNM 2020
    (제주, 한국)
2019
  • 01 Hyokyung Sung, Soojin Ahn, Kwanho Lee, Woojin An, Sangshik Kim, Jehyun Lee
    Various factors affecting fatigue behaviors of TWIP seels, TMS 2019
    (샌안토니오, 미국)
  • 02 Hyokyung Sung, Woojin An, Kwanho Lee, Sangshik Kim, Jehyun Lee
    Effects of Elevated Temperature on Mechanical Properties of the High Strength Al Zn Mg Cu Alloy, ISOPE 2019
    (호놀룰루, 미국)
  • 03 Hyokyung Sung, Im Doo Jung, N. Subba Reddy, Sangshik Kim
    ARTIFICIAL INTELLIGENCE BASED PREDICTION OF CHARPY IMPACT PROPERTIES BY USING MICROSTRUCTURAL PARAMETERS IN API PIPELINE STEELS IMRC 2019
    (칸쿤, 멕시코)
  • 04 Im Doo Jung, Jungsub Lee, JS Kim, Hyokyung Sung, Junhyeok Park, Ji-Hun Yu
    SLM (Selective Laser Melting) Process is Applicable in Ti-6Al-4V Alloys for Aerospace Application, PMTI 2019
    솔트레이크시티, 미국)
  • 05 배재웅, 정재면, 박정민, 김정기, 문지현, Stefanus Harjo, 김형섭
    On the Transformation-induced Plasticity in Non-equiatomic FeCoNiCr Medium-entropy Alloys, TMS 2019
  • 06 김형섭, 김정기, 이학현, 이성학
    Deformation instability in the layered steel sheet, TMS 2019
2018
  • 01 Woojin An, Junhyuck Park, Kwanho Lee, Daeho Jeong, Hyokyung Sung, Sangshik Kim
    High Cycle Fatigue Behavior of Dissimilar High-Mn Steel Welds at Cryogenic Temperature, ICAMR 2018
    (후쿠오카, 일본)
  • 02 Kwanho Lee, Dohee Kim, Jiho Park, Daeho Jeong, Sangshik Kim, Hyokyung Sung
    S-N fatigue behavior of TWIP and TRIP steel weld joints at cryogenic temperature , ICENS 2018
    (삿포로, 일본)
  • 03 Daeho Jeong, Hyokyung Sung, Jehyun Lee, Sangshik Kim
    Effect of Cooling Condition on Fatigure Crack Propar, TMS 2018
    (피닉스, 미국)
  • 04 Sangshik Kim, Daeho Jeong, Hyokyung Sung, Jehyun Lee
    Factor Influencing Behavior of High-Mn Steels, ISOPE 2018
    (삿포로, 일본)
  • 05 Junhyuck Park, Woojin An, Dohee Kim, Jiho Park, Kwanho Lee, Hyokyung Sung
    Effect of Traverse Speed on Microstructure and Mechanical Properties of H13 Tool Steel Manufactured by 3D Printing, ISNNM 2018
    (리스본, 포르투갈)
  • 06 Kwanho Lee, Daeho Jeong, Hyokyung Sung, 김영주, Jehyun Lee, Sangshik Kim
    S-N fatigue behavior of Fe25Mn steel and its weld at 298 and 110 K, THERMEC 2018
    (파리, 프랑스)
  • 07 김정기, 윤재익, 백승미, 서민홍, 진광근, 이성학, 김형섭
    Stretch-flangeability of the TWIP steel-based multi-layer steel sheet, AWMFT 2018
2017
  • 01 박형근, 백승미, 김정기, 이학현, 문종언, 윤재익, 김형섭
    Asymmetry of Twinning-Induced Plasticity Steel during Three-Point Bending, The 3rd International Conference on High Manganese Steels
  • 02 정재면, 윤재익, 김정기, M. Latypov, 김진유, 김형섭
    Effect of Deformation Heterogeneity of TWIP Steels on Near Boundary Twinning Behavior Using Crystal Plasticity Simulation, TMS 2017
  • 03 김정기, 백승미, 윤재익, 이성학, 김형섭, 서민홍, 조원태, 송태진, 진광근
    Formability of TWIP-Cored Three-Layer Steel Sheet, The 3rd International Conference on High Manganese Steels
  • 04 김정기, N. Enikeev, M. Abramova, M. Karavaeva, 설재복, 박찬경, R. Valiev, 김형섭
    Achieving maximum strength in bulk metallic metals using multiple strengthening mechanisms, NanoSPD 7
  • 05 김정기
    Effect of initial grain size of twinning-induce plasticity steel on severe deformation, GSAM 2017
  • 06 M. Abramova, N. Enikeev, 김정기, 설재복, M. Karavaeva, R. Valiev, 김형섭
    MECHANICAL PROPERTIES AND MICROSTRUCTURE IN A TWIP STEEL SUBJECTED TO HIGH PRESSURE TORSION, EUROMAT 2017
  • 07 윤재익, 정재면, 김정기, 손석수, 이성학, 김형섭
    Key Factors Governing Stretch-flangeability of Sheet Metals, MS&T 17
  • 08 김정기, N. Enikeev, M. Abramova, M. Karavaeva, 설재복, 박찬경, R. Valiev, 김형섭
    Manufacturing multiple-strengthened nanocrystalline steel via elevated-temperature severe plastic deformation, AWMFT 2017
  • 09 M. Shahbaz, 문종언, N. Pardis, 김정기, R. Ebrahimi, 김형섭
    Experimental and finite element analyses of plastic deformation behavior in streamline proposed vortex extrusion die, UFGNSM 2017
2016
  • 01 김정기, 박병호, 엄호용, 이동준, 이성학, 김형섭
    Mechanical and Microstructural Properties of Commercial Twinning-induced Plasticity (TWIP) Steel Processed by High-pressure Torsion (HPT), TMS 2016
  • 02 M. Janecek, M. Pokova, J. Straska, J. Cizek, R. Kuzel, 김정기, 김형섭
    Microstructure Evolution, Defect Structure and Mechanical Property in Ultrafine-grained MgGd Alloy Processed by High Pressure Torsion, TMS 2016
2015
  • 01 김정기, 서민홍, N. Anjabin, 백승미, 박병호, 김성규, 진광근, 이성학, 김형섭
    Formability of Twinning-Induced Plasticity Steels and the Effect of Dynamic Strain Aging, Asia Steel 2015
2014
  • 01 박병호, 김정기, 김형섭
    Hierarchical Core-Sheath Composites via Multi-Pass Caliber Rolling, AWMFT 2014